- 1 1/2 yard of knit fabric with good stretch (I used Sew Classics purchased from Joann's)

-a skirt you already own that fits you at the waist where/how you want your maxi to fit (I used a knee length knit skirt that has a waistband I like)

-pins

-elastic thread

-thread

-scissors

-measuring tape

-chalk, pen or pencil

-tissue paper or something to trace onto

-sewing machine

NOTE: When working with stretchy fabrics such a knits, it is important to not pull on the fabric or stretch it as you sew, if you do your skirt will turn out huge!

3.  Lay your preowned skirt on top of the tissue paper and using the chalk trace the waistband. Cut this out and pin it to the top of your fabric. This will let you know how wide to cut the top of your skirt. I didn't bother adding any length on for side seams because knit fabric is so forgiving it doesn't matter if it is slightly smaller because it stretches anyways.
NOTE: You could just measure your waist with a measuring tape, but if I don't have to work with numbers I will avoid it.

4. Measuring how long you want your skirt to be + some extra for the hem and the waistband you want to make. I like thick 1" hems, and I added about 3" to the top for the waistband. Using a tape measure, and taking all your measurements in to consideration, draw out the skirt. Using chalk, taper the fabric out from the waistband down to the bottom. Think of it like making a big triangle. I used the full width of the bottom of the fabric for the bottom of my skirt. You want it to be wide so you have enough room for your stride. I didn't really get too mathematical here. I just freehanded it.

7. Try it on inside out. At this point, make sure it's as tight as you want. If you want it tighter go back and sew a larger side seam.

8. Create waistband: while it is on inside out, fold the top of the skirt down a few times to create a waistband. You can make this however thin or thick you want, but remember you still need to hem it so don't make is so big you lose length. My waistband is about 1" thick. Make sure the waistband is even all the way around your waist. Pin it in place while it is on you.

9. Slide is off and sew down the waistband you just created. I just lined the foot of the sewing machine up with the bottom of the fold (waistband) I just created and sewed all around. I used elastic thread for the waistband so it will stretch easily. Find out how to use elastic thread here.

10. Put your skirt back on to make the hem. I don't do anything fancy here. I just bend down fold it under and pin it a few times in front, then stand back up straight to see if I need to make adjustments. Once you have it pinned to your liking take it off and pin it all the way around and then hem it.


NOTE: I recommend trying it on with the shoes you intend to wear with it. If you will wear it with high heels and wedges you'll want to take that into consideration because, therefore, you'll want your skirt to be longer.